HOME
SITE MAP

  

 Main:  763 546 6499
  Fax:  763 546 3231
    
Email:
sales@trc-circuits.com

 

Manufacturing Services
This section is under development, please come back soon!

TRC Circuits has been successfully manufacturing rigid printed circuit boards since 1985.TRC can manufacture Boards in as little as 12 hours.  Our high quality printed circuit boards are the reason for our success.  We are capable of manufacturing proto-type boards as well as large or small production  runs.  Big or small we can truly do it all. 

Engineering has over 50 years  combined experience and makes it possible to be number one.  All data received goes through a vigorous DRC/DFM (Design for Manufacturing ) process.  Our expert engineers will let you know up-front if your data will prove to be successful in manufacturing.  See our list of current capabilities.

Our Manufacturing group is highly skilled and most all cross trained to assist others to keep production moving continuously.  Each individual is trained consistently to be certain each process is done the same no matter who does it.  At TRC we feel Experience, Consistency, Pride in our work and Quality is what places us a step above the rest. 

Explanation
A Printed Circuit Board or PCB is Mechanical Support & electrically wired the electronic components using the copper (conductive path) which is made by etching copper clad. PCB is also called as printed Wired Board (PWB). The PCB without component is raw PCB & PCB with component is called printed circuit board assembly it means the raw PCB is assembled with electronics components.

Now a day’s PCB (raw) become very inexpensive especially Single sided Board (SSB) & Double Sided Board (DSB). Multi layers PCB are still costly due to its high setup charges.

  • Single Sided Board (SSB)
    The Printed Circuit Board which has only one copper layer.

  • Double Sided Board (DSB)
    The Printed Circuit Board which has two copper layers.

  • Multi layer Board
    The Printed Circuit Board which has more than two copper layers.

    Material Used for Printed Circuit Board (PCB)
    FR406, FR4, FR04, IS410,Nelco , Polyimide, Rogers, Duroid, VT45 and47. FR-4 printed circuit board material is most commonly used.

Factors which play vital role deciding the price of Printed Circuit Board. 
* Minimum Gap, ( pad/pad, pad/trace, trace/trace )  It should be minimum 0.005"

* Minimum Track Width, It should be minimum 0.005"

* Copper Voids, The acceptable size is over 0.006"

* Annular Ring, It should be 0.008" either side this should be checked with drill diameter not finished diameter

* Masking openings, The mask opening minimum 0.0025" either side.  Oversize masking should be modified so that track exposure is avoided.

* Unterminited traces, Some times a designers skips the connection & in the Gerber it appears as a unterminated trace.
 

 

 
 

TRC offers Manufacturing Services, Engineering Services, Test Services and Photoplotting Services to the printed circuit board world and other industries.

 

   © Copyright 2008